|
Universal Testing Machines
Computer Controlled UTM's
Hardness Testers
Impact Testing Machines
SERVO Hydraulic Machines
Rubber & Plastic Testing Machines
Metallography
Laboratory Equipments
Machine Tools & SPM's
Other Testing Machines
| |
|
IMPACT TESTING MACHINES
The Pendulum is mounted on
antifriction bearings. It has two starting positions, the upper one for
Charpy & the lower one for Izod testing. On release, the pendulum swings
down to brake the specimen and the energy absorbed in doing so is measured
as the difference between the height of drop before rupture and the height
of rise after rupture of the test specimen and is read from the maximum
pointer position on the dial scale.
(It is read on digital readout in case of electronic machines.)
There are two strikers and one combined support available for lifting in to
the pendulum and on to the base of the machine for Izod., Charpy test,
Changing from one striker to another is achieved simply by fixing the new
striker into it's position. |
 |
General Description :
The pendulum Impact Tester Model IT 30 is designed for conducting
izod, Charpy test. The test methods confirm to
BS : 131 : part 4-1972 (amended 15 Aug. 1993)
BSEN : 10045-2 : 1993 & ASTM : E-23-94a.
|
 |
CHARPY TEST :
The charpy test piece rests on alloy support anvils, fitted on the
base of the machine rigidly held in position by Allen screws. End
stopper is provided for quickly and accurately locating the test piece
centrally between the supports.
IZOD TEST :
The Izod test is clamped vertically in Izod support fitted on the
base of the machine. The support is provided with a machined vertical
groove to suit the test piece size. The front clamp piece and the
Allen screw enable clamping of the test piece in correct height with
the help of Izod setting gauge supplied.
|
 |
This impact tester offered with 300J
energy exclusively for Charpy test confirming to ASTM- E-23. This
machine is geometrically checked in the works to the more stringent
requirements of the American standard. The accuracy of the machine is
then verified by PROOF TEST by testing standard test specimens
supplied the NIST, USA. All two sets of the five specimen must agree
with the normal values within certain tolerance specified. |
|
|
MODEL |
IT-30 |
IT-30D |
IT-30 (ASTM)
Charpy Test |
IT-1.5 |
IT-0.5 |
|
Maximum capacity |
300J/168J |
300J/170J |
300J |
15J |
5J |
|
Minimum Scale Graduation |
2J |
0.5J |
2J |
0.1J |
0.05J |
|
Overall Size ( Approx. ) |
1.1m x 0.45 m x 1.65 m (H) |
1.32m x 0.45 m x 1.05 m (H) |
1.4m x 0.5 m x 1.9 m (H) |
0.5m x 0.3 m x 0.52 m (H) |
0.5m x 0.3 m x 0.52 m (H) |
|
Net Weight ( Approx. ) |
375 kg |
375 kg |
450 kg |
70 kg |
70 kg |
|
OPTIONAL ACCESSORIES FOR IT 30 / IT 30 D :
• Caliper gauge for checking V notch for Izod & Charpy.
• Templates for checking 10 x 10 mm cross section of Izod / Charpy
test specimen.
• Depth notch gauge including V & U notch gauges for checking depth
blow V/U notch, angle and radius.
• Izod support for 0.450 dia Izod round specimen.
• Self centering tong for quick and accurate setting of Charpy test
specimen.
• 'V' notch milling cutter
• 'U' notch milling cutter |
|
